Show Management - Edge-Core ECS4120-28F Reference Manual

show management

Example
This example restricts management access to the indicated addresses.
Console(config)#management all-client 192.168.1.19
Console(config)#management all-client 192.168.1.25 192.168.1.30
Console#
This command displays the client IP addresses that are allowed management
access to the switch through various protocols.
Syntax
show management {all-client | http-client | snmp-client | telnet-client}
all-client - Displays IP addresses for all groups.
http-client - Displays IP addresses for the web group.
snmp-client - Displays IP addresses for the SNMP group.
telnet-client - Displays IP addresses for the Telnet group.
Command Mode
Privileged Exec
Example
Console#show management all-client
Management Ip Filter
HTTP-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
SNMP-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
TELNET-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
Chapter 8
End IP address
192.168.1.19
192.168.1.30
End IP address
192.168.1.19
192.168.1.30
End IP address
192.168.1.19
192.168.1.30
– 269 –
| Authentication Commands
Management IP Filter