Edge-Core ECS4120-28F Reference Manual page 165

28/52-port layer 2+ gigabit ethernet switch

Hide thumbs Also See for ECS4120-28F:

Table of Contents

b-month - The month when summer time will begin. (Options: january |

| november | december)

b-hour - The hour when summer time will begin. (Range: 0-23 hours)

b-minute - The minute when summer time will begin. (Range: 0-59 minutes)

e-week - The week of the month when summer time will end. (Range: 1-5)

e-day - The day of the week summer time will end. (Options: sunday |

e-month - The month when summer time will end. (Options: january |

| november | december)

e-hour - The hour when summer time will end. (Range: 0-23 hours)

e-minute - The minute when summer time will end. (Range: 0-59 minutes)

offset - Summer-time offset from the regular time zone, in minutes.

(Range: 1-120 minutes)

Default Setting

Command Mode

Global Configuration

Command Usage

In some countries or regions, clocks are adjusted through the summer months

so that afternoons have more daylight and mornings have less. This is known as

Summer Time, or Daylight Savings Time (DST). Typically, clocks are adjusted

forward one hour at the start of spring and then adjusted backward in autumn.

This command sets the summer-time time zone relative to the currently

configured time zone. To display a time corresponding to your local time when

summer time is in effect, you must indicate the number of minutes your

summer-time zone deviates from your regular time zone (that is, the offset).

The following example sets a recurring 60 minute offset summer-time to begin on

the Friday of the 1st week of March at 01:59 hours and summer time to end on the

Saturday of the 2nd week of November at 01:59 hours.

Console(config)#clock summer-time MESZ recurring 1 friday march 01 59 2

saturday november 1 59 60

Console(config)#

Related Commands

show sntp (157)

| System Management Commands

Show Quick Links

Table of Contents