Clear Ipv6 Mld Snooping Groups Dynamic - Edge-Core ECS4120-28F Reference Manual

Command Mode
Global Configuration
Example
clear ipv6 mld
This command clears multicast group information dynamically learned through
snooping groups MLD snooping.
dynamic
Syntax
Command Mode
Privileged Exec
Command Usage
This command only clears entries learned though MLD snooping. Statically
configured multicast address are not cleared.
Example
clear ipv6 mld
This command clears MLD snooping statistics.
snooping statistics
Syntax
Command Mode
Privileged Exec
Console(config)#ipv6 mld snooping vlan 1 static ff05:0:1:2:3:4:5:6 ethernet
1/6
Console(config)#

clear ipv6 mld snooping groups dynamic

Console#clear ipv6 mld snooping groups dynamic
Console#
clear ipv6 mld snooping statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN identifier (Range: 1-4094)
– 685 –
Chapter 24
| Multicast Filtering Commands
MLD Snooping