Table 134: Igmp Filtering And Throttling Commands - Edge-Core ECS4120-28F Reference Manual

28/52-port layer 2+ gigabit ethernet switch
Hide thumbs Also See for ECS4120-28F:
Table of Contents

Advertisement

Chapter 24
| Multicast Filtering Commands
IGMP Filtering and Throttling
IGMP Filtering and Throttling
trunk) on this switch, that interface can be manually configured to join all the
current multicast groups.
IGMP Snooping must be enabled globally on the switch (using the
snooping
command) before a multicast router port can take effect.
Example
The following shows how to configure port 10 as a multicast router port within VLAN
1.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/10
Console(config)#
In certain switch applications, the administrator may want to control the multicast
services that are available to end users. For example, an IP/TV service based on a
specific subscription plan. The IGMP filtering feature fulfills this requirement by
restricting access to specified multicast services on a switch port, and IGMP
throttling limits the number of simultaneous multicast groups a port can join.

Table 134: IGMP Filtering and Throttling Commands

Command
ip igmp filter
ip igmp profile
permit, deny
range
ip igmp authentication
ip igmp filter
ip igmp max-groups
ip igmp max-groups action
ip igmp query-drop
ip multicast-data-drop
show ip igmp
authentication
show ip igmp filter
show ip igmp profile
show ip igmp query-drop
Function
Enables IGMP filtering and throttling on the switch
Sets a profile number and enters IGMP filter profile
configuration mode
Sets a profile access mode to permit or deny
Specifies one or a range of multicast addresses for a profile IPC
Enables RADIUS authentication for IGMP JOIN
requests.
Assigns an IGMP filter profile to an interface
Specifies an IGMP throttling number for an interface
Sets the IGMP throttling action for an interface
Drops any received IGMP query packets
Drops all multicast data packets
Displays IGMP authentication settings for interfaces
Displays the IGMP filtering status
Displays IGMP profiles and settings
Shows if the interface is configured to drop IGMP query
packets
– 664 –
ip igmp
Mode
GC
GC
IPC
IC
IC
IC
IC
IC
IC
PE
PE
PE
PE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecs4120-28f-iEcs4120-28tEcs4120-28pEcs4120-52t

Table of Contents