Lldp Med-Tlv Network-Policy - Edge-Core ECS4120-28F Reference Manual

Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv med-cap
Console(config-if)#
lldp med-tlv
This command configures an LLDP-MED-enabled port to advertise its network
network-policy policy configuration. Use the no form to disable this feature.
Syntax
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises network policy configuration information, aiding in the
discovery and diagnosis of VLAN configuration mismatches on a port. Improper
network policy configurations frequently result in voice quality degradation or
complete service disruption.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv network-policy
Console(config-if)#
lldp notification
This command enables the transmission of SNMP trap notifications about LLDP
changes in remote neighbors. Use the no form to disable LLDP notifications.
Syntax
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
◆
[no] lldp med-tlv network-policy
[no] lldp notification
This option sends out SNMP trap notifications to designated target stations at
the interval specified by the
– 763 –
Chapter 25
lldp notification-interval
| LLDP Commands
command. Trap