Table 17: Flash/File Commands - Edge-Core ECS4120-28F Reference Manual

Chapter 4
| System Management Commands
File Management
can be copied to the FTP/TFTP server, but cannot be used as the destination on the
switch.

Table 17: Flash/File Commands

Command
General Commands
boot system
copy
delete
dir
umount usbdisk
whichboot
Automatic Code Upgrade Commands
upgrade opcode auto
upgrade opcode path
upgrade opcode reload
show upgrade
TFTP Configuration Commands
ip tftp retry
ip tftp timeout
show ip tftp
Function
Specifies the file or image used to start up the system
Copies a code image or a switch configuration to or from
flash memory or an FTP/TFTP server
Deletes a file or code image
Displays a list of files in flash memory
Prepares the USB memory device to be safely removed
Displays the files booted
Automatically upgrades the current image when a new
version is detected on the indicated server
Specifies an FTP/TFTP server and directory in which the
new opcode is stored
Reloads the switch automatically after the opcode upgrade
is completed
Shows the opcode upgrade configuration settings.
Specifies the number of times the switch can retry
transmitting a request to a TFTP server
Specifies the time the switch can wait for a response from a
TFTP server before retransmitting a request or timing out
for the last retry
Displays information about TFTP settings
– 120 –
Mode
GC
PE
PE
PE
PE
PE
GC
GC
GC
PE
GC
GC
PE