Configuring Ntp - Edge-Core ECS4120-28F Reference Manual

Configuring NTP

Requesting the time from a an NTP server is the most secure method. You can
enable NTP authentication to ensure that reliable updates are received from only
authorized NTP servers. The authentication keys and their associated key number
must be centrally managed and manually distributed to NTP servers and clients.
The key numbers and key values must match on both the server and client.
When more than one time server is configured, the client will poll all of the time
servers, and compare the responses to determine the most reliable and accurate
time update for the switch.
To configure NTP time synchronization, enter commands similar to the following.
Console(config)#ntp client
Console(config)#ntp authentication-key 45 md5 thisiskey45
Console(config)#ntp authenticate
Console(config)#ntp server 192.168.3.20
Console(config)#ntp server 192.168.3.21
Console(config)#ntp server 192.168.5.23 key 19
Console(config)#exit
Console#show ntp
Current Time
Polling
Current Mode
NTP Status
NTP Authenticate Status
Last Update NTP Server
Last Update Time
NTP Server 192.168.0.88 version 3
NTP Server 192.168.3.21 version 3
NTP Server 192.168.4.22 version 3 key 19
NTP Authentication Key 19 md5 42V68751663T6K11P2J307210R885
Current Time
Polling
Current Mode
NTP Status
NTP Authenticate Status
Last Update NTP Server
Last Update Time
NTP Server 192.168.3.20 version 3
NTP Server 192.168.3.21 version 3
NTP Server 192.168.5.23 version 3 key 19
NTP Authentication Key 45 md5 2662T75S5658RU5424180034777
Console#
Chapter 1
: Apr 29 13:57:32 2011
: 1024 seconds
: unicast
: Enabled
: Enabled
: 192.168.0.88
: Mar 12 02:41:01 2013 UTC
: Apr 2 16:28:34 2013
: 1024 seconds
: unicast
: Enabled
: Enabled
: 192.168.5.23
: Apr 2 16:00:00 2013 UTC
– 69 –
| Initial Switch Configuration
Setting the System Clock
Port: 123
Port: 0