Exec Commands; Table 3: General Command Modes - Edge-Core ECS4120-28F Reference Manual

Table 3: General Command Modes

Class
Exec
Configuration
* You must be in Privileged Exec mode to access the Global configuration mode.
You must be in Global Configuration mode to access any of the other configuration modes.

Exec Commands

When you open a new console session on the switch with the user name and
password "guest, " the system enters the Normal Exec command mode (or guest
mode), displaying the "Console>" command prompt. Only a limited number of the
commands are available in this mode. You can access all commands only from the
Privileged Exec command mode (or administrator mode). To access Privilege Exec
mode, open a new console session with the user name and password "admin. " The
system will now display the "Console#" command prompt. You can also enter
Privileged Exec mode from within Normal Exec mode, by entering the
command, followed by the privileged level password "super. "
To enter Privileged Exec mode, enter the following user names and passwords:
Username: admin
Password: [admin login password]
Console#
Username: guest
Password: [guest login password]
Console>enable
Password: [privileged level password]
Console#
Mode
Normal
Privileged
Global
CLI session with the ECS4120-28T is opened.
To end the CLI session, enter [Exit].
CLI session with the ECS4120-28T is opened.
To end the CLI session, enter [Exit].
– 79 –
Chapter 2
| Using the Command Line Interface
* Access Control List
CFM
Class Map
ERPS
IGMP Profile
Interface
Line
Multiple Spanning Tree
Policy Map
Time Range
VLAN Database
Entering Commands
enable