Table 16: Flash/File Commands - Edge-Core ECS2100-10T Reference Manual

10/28-port web-smart pro gigabit ethernet switch
Hide thumbs Also See for ECS2100-10T:
Table of Contents

Advertisement

When downloading runtime code, the destination file name can be specified to
replace the current image, or the file can be first downloaded using a different
name from the current runtime code file, and then the new file set as the startup
file.
Saving or Restoring Configuration Settings
Configuration settings can be uploaded and downloaded to and from an FTP/SFTP/
TFTP server. The configuration file can be later downloaded to restore switch
settings.
The configuration file can be downloaded under a new file name and then set as
the startup file, or the current startup configuration file can be specified as the
destination file to directly replace it. Note that the file "Factory_Default_Config.cfg"
can be copied to the FTP/SFTP/TFTP server, but cannot be used as the destination
on the switch.

Table 16: Flash/File Commands

Command
General Commands
boot system
copy
delete
dir
whichboot
Automatic Code Upgrade Commands
upgrade opcode auto
upgrade opcode path
upgrade opcode reload
show upgrade
TFTP Configuration Commands
ip tftp retry
ip tftp timeout
show ip tftp
Chapter 4
Function
Specifies the file or image used to start up the system
Copies a code image or a switch configuration to or from
flash memory or an FTP/SFTP/TFTP server
Deletes a file or code image
Displays a list of files in flash memory
Displays the files booted
Automatically upgrades the current image when a new
version is detected on the indicated server
Specifies an FTP/SFTP/TFTP server and directory in which
the new opcode is stored
Reloads the switch automatically after the opcode upgrade
is completed
Shows the opcode upgrade configuration settings.
Specifies the number of times the switch can retry
transmitting a request to a TFTP server
Specifies the time the switch can wait for a response from a
TFTP server before retransmitting a request or timing out
for the last retry
Displays information about TFTP settings
– 101 –
| System Management Commands
File Management
Mode
GC
PE
PE
PE
PE
GC
GC
GC
PE
GC
GC
PE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents