Buzzer
Operation sounds can be set to ON or OFF.
The buzzer is set to "ON" under the initial settings.
Memo
Operating Procedure
Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [] or [] to move the cursor to "Beep", and
then press the [Confirmation] key.
The <Beep> setting screen is displayed.
2
Use [] or [] to move the cursor to ON or OFF.
Settings
OFF
{
ON (Standard)
{
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
Sample
0002 TARGET-2
Setting
Instrument setup
Brightness
3
Direction
Beep
ON
Measurement button
ON
Sample
0002 TARGET-2
Setting
Instrument setup
Beep
Brightness
OFF
3
ON
Direction
Beep
ON
3
94