Front Axle Breather (4Wd Only) - Clean - Case 570T Operator's Manual

Front axle breather (4WD Only) - Clean

1. Follow Machine safety position. (Refer Engine - Safety
rules)
2. Clean the area around the breather valve (1).
3. Loosen and remove the valve.
4. Clean the breather valve (1) with a detergent solution.
NOTE: Follow the instructions for the detergent solution.
5. Carefully dry the breather valve (1) with compressed
air and reinstall it.
6. Screw in the breather valve again.
7 - MAINTENANCE
7-32
1
PTIL12TLB0478AB