Ipv6 Pim-Ssm Configuration Example - HP 6125XLG Ip Multicast Configuration Manual

Flags: 0x0
Uptime: 00:07:21
RPF interface: LoopBack0
List of 2 DF interfaces:
# Display information about the DF for IPv6 multicast forwarding on Switch D.
[SwitchD] display ipv6 multicast forwarding df-info
Total 1 RP, 1 matched
00001. RP address: 6001::1
Flags: 0x0
Uptime: 00:05:12
RPF interface: Vlan-interface103
List of 2 DF interfaces:

IPv6 PIM-SSM configuration example

Network requirements
As shown in
Receivers receive VOD information through multicast. The receiver groups of different organizations
•
form stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM
domain operates in the SSM mode.
Host A and Host C are IPv6 multicast receivers in two stub networks N1 and N2.
•
The SSM group range is FF3E::/64.
•
• MLDv2 runs between Switch A and N1 and between Switch B, Switch C, and N2.
1: Vlan-interface102
2: Vlan-interface103
1: Vlan-interface300
2: Vlan-interface400
Figure 102:
328