Configuring Traffic Filtering; Configuration Procedure - HP FlexNetwork 6600 Configuration Manual

Configuring traffic filtering

You can filter in or filter out a class of traffic by associating the class with a traffic filtering action. For
example, you can filter packets sourced from a specific IP address according to network status.

Configuration procedure

To configure traffic filtering:
Step
1. Enter system view.
2. Create a class and enter
class view.
3. Configure match criteria.
4. Return to system view.
5. Create a behavior and
enter behavior view.
6. Configure the traffic
filtering action.
7. Return to system view.
8. Create a policy and enter
policy view.
9. Associate the class with
the traffic behavior in the
QoS policy.
10. Return to system view.
11. Apply the QoS policy.
12. Display the traffic filtering
configuration.
Command
system-view
traffic classifier classifier-name
[ operator { and | or } ]
if-match [ not ] match-criteria
quit
traffic behavior behavior-name
filter { deny | permit }
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit
•
Applying the QoS policy to an
interface or PVC
•
Applying the QoS policy to a VLAN
•
Applying the QoS policy to online
users
display traffic behavior
{ system-defined | user-defined }
[ behavior-name ] [ | { begin | exclude |
include } regular-expression ]
85
Remarks
N/A
N/A
N/A
N/A
N/A
•
deny—Drops packets.
•
permit—Permits
packets to pass through.
N/A
N/A
N/A
N/A
Choose one of the application
destinations as needed.
Optional.
Available in any view.