Configuring Outbound Mbgp Route Filtering - HP MSR ASM Configuration Manual

Step
4. Advertise a default route to an
MBGP peer or peer group.
NOTE:
After you configure the peer default-route-advertise command, the router sends a default route with the
next hop as itself to the specified MBGP peer or peer group, whether the default route is available or not
in the routing table.

Configuring outbound MBGP route filtering

If several filtering policies are configured, they are applied in the following sequence:
filter-policy export
•
peer filter-policy export
•
• peer as-path-acl export
peer ip-prefix export
•
peer route-policy export
•
Only the routes that have passed all the configured policies can be advertised.
To configure BGP route distribution filtering policies:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv4 MBGP
address family view.
Command
peer { group-name | ip-address }
default-route-advertise
[ route-policy route-policy-name ]
Command
system-view
bgp as-number
ipv4-family multicast
205
Remarks
Not advertised by default.
Remarks
N/A
N/A
N/A