Chapter 15 Virtual Private Network – Hub And Spoke Vpn - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
Virtual Private Network – Hub and Spoke VPN
As described in the Figure 2-1, we will extend to explain how to make a VPN link between Main Office (the hub) and the branches
in this chapter. The following Figure 15-1 is the real structure in our implemented process.
15.1 Demands
1. Suppose that your company has a main office and two branch offices which communicates using a hub and spoke VPN
configuration. The main office is the hub where the VPN tunnels terminate, while Branch_1 and Branch_2 are the spokes.
The Main office has a VPN tunnel to each branch office. Branch_1 and Branch_2 has its own VPN tunnel to the hub.
Figure 15-1 The Topology of the VPN Hub (Main Office) and VPN Spoke (Branch offices)
15.2 Objectives
1. Using the VPN hub we can create a hub and spoke VPN configuration to direct traffic through a central MH-5001 from one
VPN tunnel to another VPN tunnel. Each VPN tunnel provides connectivity to a different remote VPN gateway. All of the
VPN Hub member tunnels can establish VPN connections with any of the other member VPN tunnels.
This chapter introduces Hub and Spoke VPN and explains how to implement it.
Virtual Private Network – Hub and Spoke VPN
123
Chapter 15
Chapter 15