Planet Networking & Communication MH-5001 User Manual page 97

MH-5001 User Manual
Step 12. Change the IP/MAC binding to
"Block"
Through the previous steps, we have configured
two IP/MAC rules for allowing passing through
MH-5001. In this step, we will change the IP/MAC
binding status to "Block" to prohibit invalid IP
address to pass through MH-5001.
Step 13. Show the IP/MAC binding rule
After finishing the setting, you can view the result
as the right diagram shown.
Advanced Settings > IP/MAC Binding > Edit Rules
Advanced Setting > IP/MAC binding > Show Rules
94
Chapter 11
IP/MAC Binding