Planet Networking & Communication MH-5001 User Manual page 166

MH-5001 User Manual
FIELD
Exempt Computers
Enforce web filter policies
for all computers
Include specified address
ranges in the web filter
enforcement
Exclude specified address
ranges from the web filter
enforcement
Range From
BUTTON
Apply
Add
Reset
Delete
Step 4. Customize the specified sites
Check the
Enable
Customization to allow all accesses to the
while
Trusted Domains
accesses to the Forbidden Domains. Check
the Disable all web traffic except for
trusted domains if you want to only allow the
access to the Trusted Domains. However, if the
web objects are set to be blocked by the
MH-5001 in step 3, these allowed accesses will
never be able to retrieve these objects. Check the
"Don't block ..." to allow the objects for these
trusted domains. The domains are maintained by
enter the address in the Domain field with a click
of the Add button. To delete a domain, click the
domain with a click of the Delete button.
DESCRIPTION
Determine which IP range will exempt the verification by the web filter
Web filter actives at all the computers, not limit
range of the IP addresses
Web filter will only active at below specified
computers.
Except below specified IP address ranges. All
the other IP address range, Web filter will active
totally.
Here we can setup the IP address range, for the
above Exempt Computers to use.
DESCRIPTION
Apply the above selected "Exempt Computers" radius button.
Add the specified IP range which filled in the above "Range From" field.
Clean the filled data and restore the original one.
Delete the specified IP range which filled in the above "Range From" field.
Table 19-2 Web Filter Exempt Zone setting page
ADVANCED SETTINGS > Content Filters > Web Filter > Customize
Filter List
disallowing all
Range/Format
Enable/Disable
Enable/Disable
Enable/Disable
IPv4 format
(Max: 256 entries)
163
Chapter 19
Content Filtering – Web Filters
EXAMPLE
disabled
Enabled
disabled
10.1.1.1 – 10.1.1.254
192.168.40.100 –
192.168.40.130