Planet Networking & Communication MH-5001 User Manual page 110

MH-5001 User Manual
Step 1. Enable IPSec
Check the Enable IPSec checkbox and click
Apply.
Step 2. Add an IKE rule
Click the IKE hyperlink and click Add to add a
new IPSec VPN tunnel endpoint.
Step 3. Customize the rule
Check the Active checkbox. Enter a name for
this rule like IKErule. Enter the Local IP
(192.168.88.0/255.255.255.0)
Address
and the
Remote
(192.168.40.0/255.255.255.0). Select the
Outgoing interface of this Multi-Homing
Security Gateway. Enter the public IP of the
opposite-side VPN gateway (61.2.1.1) in the
Peer's IP Address. Click the ESP Algorithm
and select Encrypt and Authenticate (DES,
Enter the
MD5). Pre-Shared
1234567890. Click the Apply button to store the
settings. Note, in the Action region, you should
choose either ESP Algorithm or AH Algorithm, or
system will show error message.
ADVANCED SETTINGS > VPN Settings > IPSec
ADVANCED SETTINGS > VPN Settings > IPSec > IKE
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
IP Address
Self local IP
Address
as
Key
The opposite
side IP Address
107
Chapter 13
Virtual Private Network – IPSec