Configure A Rule For Mh-5001 To Winxp Client - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual Chapter 18
Remote Access VPN – Windows client

18.4.7 Configure a rule for MH-5001 to WinXP client

Step 71. Add a new IP filter rule
Now we are going to configure the rule of
MH-5001 to WinXP client. Click Add to add a new
IP filter rule.
Step 72. Select IP filter list
Click the IP Filter List tab. Select the filter
list you created above from the IP Filter List
(MH-5001 to WinXP).
Step 73. Tunnel Settings
Click Tunnel Setting tab, and then enter the
remote endpoint. For this filter list, the remote
IPSec endpoint is WinXP (211.54.27.6).
157