Steps - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
As the above Figure 7-3 illustrates, the server 10.1.1.5 provides FTP service. But it is located on the DMZ region behind WALL-1 -
MH-5001. And MH-5001 will act as a Virtual Server role which redirects the packets to the real server 10.1.1.5. And you can
announce to the Internet users that there exists a ftp server IP/port is 61.2.1.1/44444. So, all the Internet users will just connect the
61.2.1.1/44444 to get ftp service.
7.4

Steps

7.4.1 Setup Many-to-one NAT rules
Step 1. Enable NAT
Select the Basic from the list of Network
Address Translation Mode. Click Apply.
Now the MH-5001 will automatically set the NAT
rules for LAN/DMZ zones. Namely, all internal
networks can establish connections to the outside
world if the WAN settings are correct.
FIELD
Network Address
Translation Mode
Figure 7-3 MH-5001 plays the role as Virtual Server
ADVANCED SETTINGS > NAT > Status
DESCRIPTION
Determine what NAT type you are using in your network
topology.
Refer more information in the section 7.5.4.
61
Range / Format EXAMPLE
None /
Basic /
Full Feature
Chapter 7
NAT
Basic