Internet Connectivity - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
Step 6. System Status
Here we select Fixed IP method in WAN1
port. Then the MH-5001 provides a short
summary of the system. Please check if
anything mentioned above is properly set into
the system. Click Finish to close the wizard.
1.6

Internet Connectivity

After setting up MH-5001 with the wizard, MH-5001 can connect to the ISP. In this chapter, we introduce LAN1-to-WAN1
Connectivity to explain how the computers under LAN1 can access the Internet at WAN1 through MH-5001. Subsequently, we
introduce WAN1-to-DMZ1 Connectivity to explain how the servers under DMZ1 can be accessed by the LAN1 users and other
Internet users on the WAN1 side.
You MUST press Apply to proceed to the next page. Once applying any changes, the settings are immediately
1.6.1 LAN1-to-WAN1 Connectivity
The LAN Settings page allows you to modify the IP address and Subnet Mask that will identify the MH-5001 on your LAN. This is
the IP address you will enter in the URL field of your web browser to connect to the MH-5001. It is also the IP address that all of
the computers and devices on your LAN will use as their Default Gateway.
Step 1. Device IP Address
Setup the IP Address and IP Subnet Mask for
the MH-5001.
BASIC SETUP > Wizard > Run Setup Wizard > Next > Next
updated into the flash memory.
BASIC SETUP > LAN Settings > LAN1 Status
18
Chapter 1
Quick Start