Steps For Anti-Spam - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
Step 3 – Block attached files
When enabled SMTP/POP3/IMAP filter function,
MH-5001 will do Anti-Virus with two steps. Step 1,
add the extensions which you would like to block.
(Max: 32 items) You can add/delete the items by
clicking Add/Delete button. Step 2, block
remaining attached files using built-in virus
patterns.
Note that the filename to block cannot contain the
marks such as " /, \, *, ?, ", <, >, | ".

20.5 Steps for Anti-Spam

Step 1 – Enable Anti-Spam
Click the Anti-Spam hyperlink. Check Enable
SMTP/POP3/IMAP checkbox, and then click
Apply button.
Step 2 – Message alert
After applying Anti-Spam, there will be a message
"SMTP Anti-Spam enabled. Please setup
"SMTP Relay" to do access control of the
target mail server." to notify you to setup
SMTP Relay.
ADVANCED SETTINGS > Content Filters > Mail Filters > Anti-Spam
ADVANCED SETTINGS > Content Filters > Mail Filters > Anti-Spam
173
Chapter 20
Content Filtering – Mail Filters