Save The Current Configuration - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
Step 2. Enter the Safe Mode
Enter boot rescue to enter the emergency
kernel. In this kernel, you can use tftp to fetch
another firmware to install,
configuration to default even though you lost the
password.
Step 3. Factory reset
Enter sys resetconf now to reset the firmware
to factory default. Then system will reboot
automatically.

29.6 Save the current configuration

Step 1. Backup the current
configuration
After finishing the settings of MH-5001, be sure to
Press the Save button in this page to keep the
running configuration.
29.7 Steps for Backup / Restore Configurations
Step 1. Backup the current
configuration
Before backup your current configuration, make
sure you have saved your current configurations
as described in Section 29.6. Then select page in
the page of /System Tools /System Utilities
/Backup Configurations, click Backup button to
backup configuration file to local disk.
Step 2. Restore the previous saving
configuration
In the page of System Tools / System Utilities /
Restore Configuration, click the Browse button to
select configuration file path first, and then click
Upload button to restore configuration.
or reset the
MH-5001> en
MH-5001# sys resetconf now
System will reboot now
syncing disks... done
rebooting...
SYSTEM TOOLS > System Utilities > Save Configuration
SYSTEM TOOLS > System Utilities > Backup Configuration
SYSTEM TOOLS > System Utilities > Restore Configuration
212
Chapter 29
System Maintenance