Planet Networking & Communication MH-5001 User Manual page 106

MH-5001 User Manual
Outgoing
Interface
Peer's IP Address
My Identifier
Peer's Identifier
ESP Algorithm
AH Algorithm
Pre-Shared Key
The WAN interface you are going to build IPSec
tunnel with.
The IP address of remote VPN device. The IP
address may be fixed (Static) or dynamic.
Fill your information in this field. The filled
information will be provided for the IPSec
tunnel establishment.
Fill the information of peer VPN device in this
field. The filled information will be provided for
the IPSec tunnel establishment.
ESP Algorithm may be grouped by the items of
the Encryption and Authentication Algorithms
or execute separately.
We can select below items, the Encryption and
Authentication Algorithm combination or the
below item Authentication Algorithm singly.
Here Encryption Algorithms include
DES(64 bits), 3DES(192 bits) and
AES(128/192/256 bits)
Authentication Algorithms include
MD5(128 bits) and SHA1(160 bits)
Select Authentication Algorithm
The key which is pre-shared with remote side.
Table 13-4 Related field explanation of adding an IPSec policy rule
103
Virtual Private Network – IPSec
WAN interfaces
Static IP /
Static IP 210.2.1.1
Dynamic IP
IP Address /
FQDN (domain
name) / IP Address
User FQDN
(mail box)
IP Address /
FQDN (domain
name) / IP Address
User FQDN
(mail box)
Encrypt and
Authenticate
(DES, MD5) /
Encrypt and
Authenticate
(DES, SHA1) /
Encrypt and
Authenticate
(3DES, MD5) /
Encrypt and
Authenticate
(3DES, SHA1) /
Encrypt and
Encrypt and
Authenticate
Authenticate
(AES, MD5) /
(DES, MD5)
Encrypt and
Authenticate
(AES, SHA1) /
Encrypt only
(DES) /
Encrypt only
(3DES) /
Encrypt only
(AES) /
Authenticate only
(MD5) /
Authenticate only
(SHA1)
Authenticate
(MD5) /
Disabled
Authenticate
(SHA1)
text string 1234567890
Chapter 13
WAN1