Steps - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
1. Create a custom MMC console, please refer 18.4.2 description.
2. Create an IPSec policy, please refer 18.4.3 description.
3.
Add a filter rule from WinXP to MH-5001, please refer 18.4.4 description.
4.
Add a filter rule from MH-5001 to WinXP, please refer 18.4.5 description.
5.
Configure a rule for WinXP client to MH-5001, please refer 18.4.6 description.
6.
Configure a rule for MH-5001 to WinXP client, please refer 18.4.7 description.
7.
Enable the security settings, please refer 18.4.8 description.

18.4 Steps

18.4.1 MH-5001 Setup
Step 20. Add an IPSec rule
At the MH-5001 side, we need to add an IPSec
policy to establish IPSec tunnel with WinXP client.
Enter the related IPSec parameter in the suitable
field. Note that because the remote client is just a
single WinXP machine, so we select Single
Address in the Remote Address Type field.
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
141
Remote Access VPN – Windows client
Chapter 18