Planet Networking & Communication MH-5001 User Manual page 206

MH-5001 User Manual
Step 3. CPU & Memory
We can know the device information (include
system, user, interrupt and memory utilization)
through the graphic interface.
Note: If you can not view the graphic correctly,
the situation may result from that you don't
install the java virtual machine (JVM) onto your
browser. Simply go to the following link,
http://java.sun.com/j2se/1.4.2/download.html.
And then, download the Java 2 Platform,
Standard Edition (JRE) to your platform (ex.
windows). After installing JRE properly, you
will see the CPU & Memory graphic as right
side.
Step 4. DHCP Table
Through the DHCP Table, we can recognize
which IP has been allocated by the DHCP
server. And know which pc (MAC address) has
been leased this IP address.
Step 5. Routing Table
Click the Routing Table to see the routing table
information of MH-5001.
Step 6. Active Sessions
Click the Active Sessions to see all the current
sessions of MH-5001. The Active Sessions
include all the outbound and inbound sessions.
DEVICE STATUS > System Status > CPU & Memory
DEVICE STATUS > System Status > DHCP Table
DEVICE STATUS > System Status > Routing Table
DEVICE STATUS > System Status > Active Sessions
203
Chapter 27
System Status