MH-5001 User Manual
Chapter 18
Remote Access VPN – Windows client
Step 44. Delete the extra items
In this diagram, we are going to specify the
phase1 parameter of IPSec rule at the WinXP.
We
setup
MH-5001
IPSec
phase1
with
DES-MD5-DH1 (please refer Section 18.4.1 ),
therefore we delete the extra 3 items, and only
remain the item that matches our IPSec settings
of the MH-5001.
Step 45. Remain the corresponding item
For this example, we remain the item of DES,
MD5 and DH1 combinations.
18.4.4 Add a filter rule from WinXP to MH-5001
Step 46. Add a new filter rule
In the tunnel properties, uncheck Use Add
Wizard check box, and click Add to create a new
rule. And click Add to create a new IP Security
Rule.
148