Steps For Reset Password - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual

29.8 Steps for Reset password

Step 1. Enter the boot loader
If you forget the password, you can use the
following way to reset the password. Press
or during
<tab> <space>
countdown process.
Step 2. Get the Initial Key
Enter boot -I command as right side. When
screen shows "Enter Initial Key", you can consult
with your local technical supporter to get the Initial
Key. You will need to tell the local technical
supporter all the MAC address value. Then
you will get the Initial Key. To reset admin
password.
>> NetOS Loader (i386), V1.5 (Fri Feb 20 10:25:11 CST 2004)
Press <TAB> to prompt - starting in 0
Type "boot rescue" to load safe-mode kernel to
the 2-second
(1) rescue corrupted firmware
(2) reset password for admin
type "?" or "help" for help.
>
213
Chapter 29
System Maintenance