MH-5001 User Manual
14.4 Steps
In the following we will separately explain how to set up a secure DES/MD5 tunnel with the dynamic remote gateway IP
address type.
At WALL-1:
At the first, we will install the IPSec properties of WALL-1. For the related explanation, please refer to Chapter 12 and
Chapter 10.
Step 1.
Enable IPSec
Check the Enable IPSec checkbox and click
Apply.
Step 2.
Add an IKE rule
Click the IKE hyperlink and click Add to add a
new IPSec VPN tunnel endpoint.
ADVANCED SETTINGS > VPN Settings > IPSec
ADVANCED SETTINGS > VPN Settings > IPSec > IKE
117
Virtual Private Network –Dynamic IPSec
Chapter 14