Planet Networking & Communication MH-5001 User Manual page 65

MH-5001 User Manual
BUTTON
Reset NAT Rules
Reset Server Rules
Clear active NAT/Server
sessions
Apply
Step 2. Check NAT Rules
As described in the above, the MH-5001 has set
the rules for the LAN/DMZ zones. They all belong
to the Many-to-One (M-1) type that will map
many private addresses to the automatically
chosen public IP address. When the WAN
interfaces change the IP, these rules do not
require any manual modifications for the changed
public IP addresses. The rules will reload the new
settings automatically. Besides, you cannot
insert/edit any rules under the Basic mode.
Step 3. Switch the NAT Mode
Select the Full Feature from the list of
Network Address Translation Mode. Click
Apply. After applying the setting, the page will
highlight a warning saying that the rules are no
more automatically maintained by the MH-5001. If
you change the LAN/DMZ IP settings, you have
to manually update related rules by yourself.
Otherwise, hosts in your LAN/DMZ cannot
establish connections to the hosts in the WAN
side.
DESCRIPTION
Reset NAT rules to the default status
Clear all the Virtual Server rules.
Clear all the active NAT/Virtual Server sessions.
Apply the settings which have been configured.
Table 7-1 Determine Network Address Translation Mode
ADVANCED SETTINGS > NAT > NAT Rules
ADVANCED SETTINGS > NAT > Status
62
Chapter 7
NAT