Steps - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
5.4

Steps

5.4.1 Telnet
Step 1. Setup Telnet
Enter 23 instead of the default 2323 in the
Server Port field. Check the WAN1 checkbox.
Click the Selected of Secure Client IP
Address, and then enter the specified IP
address (140.2.5.1) for accessing MH-5001.
And click the Apply.
5.4.2 SSH
Step 2. Setup SSH
Enter 22 in the Server Port field. Check the
LAN1/LAN2 checkbox. Click the ALL of Secure
Client IP Address for accessing MH-5001.
And click the Apply.
5.4.3 WWW
Step 1. Setup WWW
Check the LAN1 checkbox, and enter the new
Server Port 8080 that will be accessed by the
user's browser (http://192.168.40.254:8080).
Here we click All for all no IP range limitation of
clients. And click the Apply button.
Step 2. Message alert
If you select "Selected" and enter the IP address
in the Secure Client IP Address field. After
you apply the WWW, there will be a message to
alert you that "Warning! If you are
connecting to this Firewall with WWW,
this action may disconnect your
session. Please remember the settings
and reconnect to the Firewall again. Are
you sure to apply this action?"
Note, the Secure Client IP Address is the IP
address which can be used to configure the
MH-5001.
SYSTEM TOOLS > Remote Mgt. > TELNET
SYSTEM TOOLS > Remote Mgt. > SSH
SYSTEM TOOLS > Remote Mgt. > WWW
SYSTEM TOOLS > Remote Mgt. > WWW > Apply
52
Chapter 5
Remote Management