MH-5001 User Manual
Figure 20-1 Use SMTP / POP3 filter functionality to avoid some sensitive e-mail directly opened
20.4 Steps for Anti-Virus
Step 1 – Enable Anti-Virus
Click the Anti-Virus hyperlink. Check Enable
SMTP/POP3/IMAP checkbox, and then click
Apply button.
Step 2 – Message alert
After applying Anti-Virus, there will be a message
"SMTP Anti-Virus enabled. Please setup
"SMTP Relay" to do access control of the
target mail server." to notify you to setup
SMTP Relay.
ADVANCED SETTINGS > Content Filters > Mail Filters > Anti-Virus
ADVANCED SETTINGS > Content Filters > Mail Filters > Anti-Virus
172
Chapter 20
Content Filtering – Mail Filters