Https - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual

5.4.4 HTTPS

Step 3. Setup HTTPS
Check the LAN1/LAN2 checkbox, and enter the
new Server Port 443 that will be accessed by
the user's browser (https://192.168.40.254). Here
we click All for all no IP range limitation of
clients. And click the Apply button.
5.4.5 SNMP
Step 1. Setup SNMP
Check the LAN1 checkbox. In the Secure
Client Address field. If you prefer indicated
specified IP address. Just click the Selected,
and enter the valid IP address for reading the
SNMP MIBs at the MH-5001. Finally click the
Apply button.
5.4.6 ICMP
Step 1. Setup ICMP
Uncheck the WAN1 checkbox and make others
checked. Then click the Apply button. For
example, WAN1 IP is 61.2.1.1. When you
make a command "ping 61.2.1.1", WAN1 will
not respond to ICMP ECHO packets since you
deactivate its ICMP function.
SYSTEM TOOLS > Remote Mgt. > HTTPS
SYSTEM TOOLS > Remote Mgt. > SNMP
SYSTEM TOOLS > Remote Mgt. > MISC
53
Chapter 5
Remote Management