Configure A Rule For Winxp Client To Mh-5001 - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual Chapter 18
Remote Access VPN – Windows client

18.4.6 Configure a rule for WinXP client to MH-5001

Step 59. Select the first IP filter list
Now there are two IP filter lists for the WinXP
IPSec use. Select the first filter list you have
created above from the IP Filter List, such
as WinXP to MH-5001.
Step 60. Tunnel Settings
Click Tunnel Setting tab, enter the remote
endpoint. For this filter list, the remote IPSec
endpoint is MH-5001 (61.2.1.1).
Step 61. Connection Type
Click Connection Type tab, and then click All
network connections.
153