Planet Networking & Communication MH-5001 User Manual page 18

MH-5001 User Manual
Step 1. Login
Type "admin" in the account field, "admin" in
the Password field and click Login.
Note: Please do not access web UI through
proxy, or the login may be locked by others or
the original user.
Step 2. Run Setup Wizard
Click the Run Setup Wizard.
Step 3. System Name
Enter the Host Name and the Domain Name,
followed by clicking the Next.
Step 4. Operation Mode
MH-5001 Multi-Homing Security Gateway can
operate in
NAT/Router
Transparent mode. Choose which operation
Mode for this device to use.
In NAT/Route mode, you can create NAT mode rules and Route mode rules. For the related information, please
refer to Chapter 7 and Chapter 8.
NAT mode rules use network address translation to hide the addresses in a more secure network from users
NAT/Route mode
in a less secure network.
Route mode rules accept or deny connections between networks without performing address translation.
Connect to https://192.168.1.254
After login to https://192.168.1.254
BASIC SETUP > Wizard
BASIC SETUP > Wizard
BASIC SETUP > Wizard > Next
or
mode
15
Chapter 1
Quick Start