Steps For Firmware Upgrade From Web Gui - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
Step 1. Setup TFTP server
Place the TFTP server TftpServer in the c:\
directory and double click to run it. Place all bin
files in the c:\ as well. Set the PC to be
192.168.40.x to be in the same subnet with the
MH-5001's LAN1. Login to MH-5001's console.
Enter en to enter privileged mode. Configure the
LAN1 address so that the MH-5001 can connect
to the TFTP server. The CLI command to
configure LAN1 interface is ip ifconfig INTF3
192.168.1.254 255.255.255.0.
Step 2. Upgrade firmware
Enter IP tftp upgrade image 192.168.1.x
MH-5001-<ver>.bin After this
procedure, MH-5001 device will reboot
automatically.
Notice: if you want to preserve the
previous configuration, add the
"preserve" keyword to the end.
Refer Appendix A for the details.
Step 3. Check if OK
Check whether the system status is working
properly or not.

29.3 Steps for Firmware upgrade from Web GUI

Step 4. Download the newest firmware
from web site
If a new firmware issued, we can download it
from the
(planet.com.tw/download.php) to the local
computer.
NetOS/i386 (MH-5001) (tty00)
login: admin
Password:
Welcome to MH-5001 Multi-Homing Security Gateway!
MH-5001> en
MH-5001# ip ifconfig INTF3 192.168.40.254 255.255.255.0
MH-5001#
MH-5001# ip tftp upgrade image MH-5001-1.602-ALL.bin
192.168.1.170 preserve
Fetching from 192.168.1.170 for MH-5001-1.602-ALL.bin
tftp> tftp> Verbose mode on.
tftp> getting from 192.168.1.170:MH-5001-1.602-ALL.bin to
MH-5001-1.602-ALL.bin [octet]
web site
Firmware upgrade site：
http://www.planet.com.tw/download.php
209
Chapter 29
System Maintenance