Planet Networking & Communication MH-5001 User Manual page 104

MH-5001 User Manual
FIELD
Enable IPSec
BUTTON
Apply
Step 2. Add an IKE rule
Click the IKE hyperlink and click Add to add a
new IPSec VPN tunnel endpoint.
FIELD
IKE
Manual Key
BUTTON
Prev. Page
Next Page
Add
Edit
Delete
DESCRIPTION
Enable IPSec feature of MH-5001
DESCRIPTION
Apply the settings which have been configured.
Table 13-2 Enable the IPSec feature
ADVANCED SETTINGS > VPN Settings > IPSec > IKE
DESCRIPTION
Use the IKE (Internet Key Exchange) method to negotiate the key used in
building IPSec tunnel.
Use the key which you have been designated to build IPSec tunnel in peer
VPN device.
DESCRIPTION
If there are more than one action pages, you can press Prev. Page to back to the previous page.
If there are more than one action pages, you can press Next Page to go to the next page.
Insert a new IPSec rule.
Edit the properties of the indicated IPSec rule.
Delete the indicated IPSec rule.
Table 13-3 Add an IPSec policy rule
101
Chapter 13
Virtual Private Network – IPSec
EXAMPLE
Enabled
EXAMPLE
Selected
Non selected