Outbound Traffic Management - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
Step 10. View the results
We can see the result of our settings at the
DMZ-to-LAN rule direction.

24.4.1 Outbound Traffic Management

Step 1. Enable Bandwidth
Management
Check the Enable Bandwidth Management
checkbox, click the Apply.
Step 2. Setup the WAN1 Link
Select ANY to WAN1 to setup traffic that will be
transmitted by the WAN1 interface. Enter the
WAN1 interface bandwidth as 1544kbps. Click
the Apply button to enforce the WAN1 link
bandwidth to be 1544kbps. Then click Create
Sub-Class to partition the default class.
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > Bandwidth Mgt. > Status
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions
193
Chapter 24
Bandwidth Management