Planet Networking & Communication MH-5001 User Manual page 130

MH-5001 User Manual
Step 13. Customize a Firewall rule
Enter the Rule Name as AllowVPN, Source IP as
Hub-Spoke2 [Hub (192.168.1.0), Spoke_2
(192.168.88.0)], and Dest. IP as Spoke_1
(192.168.40.0). Click Apply to store this rule.
Step 14. Add a VPN Spoke in Branch_1
Select Add to add a VPN Spoke. Enter a name in
the Spoke Name field. Enter the Local IP
Address/Subnet Mask and Remote Address IP
Address/Subnet Mask. Select the VPN tunnel
which is established to connect Branch_1 and
Main Office.
Note the Tunnel of Action is the IPSec tunnel
which you have finished setting before. Please
refer the Table 15-1 IPSec tunnel information.
Step 15. View the added VPN Spoke
You can view the added VPN spoke here.
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
ADVANCED SETTINGS > VPN Settings > VPN Spoke > Add
ADVANCED SETTINGS > VPN Settings > VPN Spoke
127
Virtual Private Network – Hub and Spoke VPN
Chapter 15