Planet Networking & Communication MH-5001 User Manual page 231

MH-5001 User Manual
L02
L03
L04
L05
L06
L07
L08
L09
N01
NAT N02
N03
R01
R02
R03
ROUTING
SYSTEM S01
S02
S03
S04
Mail Log
Remote Syslog Server offline
Enable/Disable Syslog
Forward to Remote Syslog
Server
Enable/Disable Mail Log
Send Mail Log
Log Cleanup
Mail Log Configuration
Update
Log Half-Clean
Set NAT Mode
NAT Rules
Virtual Server
Static Route
Policy Route
Changing Routing Protocol
OSPF Area ID
Routing Protocol: OSPF
Routing Protocol:
RIPv2/In+Out
Routing Protocol:
RIPv1/In+Out
Routing Protocol: RIPv2/In
Routing Protocol: RIPv1/In
Routing Protocol: None
Wall Startup
Wall Shutdown
Interface Configuration
Startup/Shutdown DHCP
Server
LOG: [L02] mail logfile to tom@hotmail.com.
LOG: [L04] Enable syslog server at 192.168.17.100 by admin
(192.168.17.102:443).
LOG: [L04] Disable syslog server by admin
(192.168.17.102:443).
LOG: [L05] Enable mail logs to tom@hotmail.com by admin
(192.168.17.102:443).
LOG: [L05] Disable mail logs by admin (192.168.17.102:443).
LOG: [L06] mail logfile to tom@hotmail.com
LOG: [L07] logfile is cleanup.
LOG: [L08] Mail configuration updated by admin
(192.168.17.102:443).
LOG: [L09] logfile half-clean.
NAT: [N01] Disable WAN NAT feature.
NAT: [N02]
ROUTING: [R03]
ROUTING: [R3] WAN1: OSPF Area ID = 15. EventID:15
ROUTING: [R3] WAN1: Routing Protocol: OSPF. EventID:15
ROUTING: [R3] WAN1: Routing Protocol: RIPv2/In+Out.
EventID:15
ROUTING: [R3] WAN1: Routing Protocol: RIPv1/In+Out.
EventID:15
ROTUING: [R3] WAN1: Routing Protocol: RIPv2/In.
EventID:15
ROUTING: [R3] WAN1: Routing Protocol: RIPv1/In.
EventID:15
ROUTING: [R3] WAN1: Routing Protocol: None. EventID:15
SYSTEM: [S01] Wall Startup.
SYSTEM: [S02] Wall Shutdown.
SYSTEM: [S03] WAN1: IP Address Assignment = Get IP
Automatically by admin (192.168.17.102:443).
SYSTEM: [S03] WAN1: IP Address Assignment = Fixed IP
Address by admin (192.168.17.102:443).
SYSTEM: [S03] WAN1: Got PPPoE IP Address
F63/255.255.255.0.
SYSTEM: [S04] Enable DHCP server on LAN1 by admin
(192.168.17.102:443)
SYSTEM: [S04] Disable DHCP server on LAN1.
228
Appendix C
System Log Syntax