Network Settings - Planet Networking & Communication IMG-120T User Manual

4.3 Network Settings

This function allows setting the value for network configuration. For the IP address, set the values of IP Address,
Subnet Mask and Gateway. For the DNS server address, set the value of DNS Server. Press the "Submit"
button to finish the settings as shown in Figure 4-3.
The page includes the following configurable data:
Network Settings
• Use the following IP
Address
• Automatically Obtain
IP Address
• IP Address
• Subnet Mask
• Gateway
• Use
the following
DNS Server Address
Figure 4-3: Network Settings Screen
Choose static IP address for the Industrial Modbus Gateway.
Enable the DHCP function for the Industrial Modbus Gateway.
When enabling this function, the Industrial Modbus Gateway will send a
DHCP request to the DHCP server in the network. Once the DHCP Server
gets the request, it will assign a dynamic IP address, subnet mask and
gateway to the Industrial Modbus Gateway. The factory default setting is
"Disable".
Manually assign IP address to the Industrial Modbus Gateway.
The factory default value is 192.168.0.100
Manually assign subnet mask to the Industrial Modbus Gateway.
The factory default value is 255.255.255.0
Manually assign Gateway to the Industrial Modbus Gateway.
The factory default value is 192.168.0.254
Choose static IP address for the DNS server of Industrial Modbus
Gateway.
-46-
User's Manual of IMG-120T