Planet Networking & Communication MH-5001 User Manual page 24

MH-5001 User Manual
Step 7. Setup Server Rules
Insert a virtual server rule by clicking the
Insert button.
Step 8. Customize the Rule
Customize the rule name as the ftpServer.
For any packets with its destination IP
address equaling to
(61.2.1.1) and destination port equaling to
44444. MH-5001 will translate the packet's
destination IP/port into 10.1.1.5/21. Check
the Passive FTP client to maximize the
compatibility of the FTP protocol. This is
useful if you want to provide connectivity to
passive FTP clients. For passive FTP clients,
the server at DMZ will return them the private
IP address (10.1.1.5) and the port number for
the clients to connect back for
transmissions. Since the FTP clients at the
WAN side cannot connect to a private-IP
(ex.10.1.1.5) through the Internet. The data
connections would be fail. After enabling this
feature, the MH-5001 will translate the private
IP/port into an IP/port of its own. Thus the
problem is gracefully solved. Click Apply to
proceed.
Warning message
After applying the virtual server rule, there will appear two messages as above diagrams. The purpose of the above two message
boxes are trying to remind you to add firewall/NAT rules manually while you add a virtual server rule for your existing server.
ADVANCED SETTINGS > NAT > Virtual Servers
ADVANCED SETTINGS > NAT > Virtual Servers > Insert
the WAN1 IP
data
21
Chapter 1
Quick Start