Planet Networking & Communication MH-5001 User Manual page 111

MH-5001 User Manual
Step 4. Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
Step 5. Add a Firewall rule
Same as at WALL-1. We need to add an extra
firewall rule to allow IPSec packets to come from
Internet. So here we select WAN1-to-LAN1
direction, and click Insert button.
Step 6. Customize the Firewall rule
Check the Activate this rule. Enter the
Rule Name as AllowVPN, Source IP as
WAN1_VPNB (192.168.40.0), and Dest. IP
as LAN1_VPNB (192.168.88.0). Click Apply
to store this rule.
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
108
Chapter 13
Virtual Private Network – IPSec