Table of Contents
Advertisement
MH-5001 User Manual
Chapter 18
Remote Access VPN – Windows client
18.4.5 Add a filter rule from MH-5001 to WinXP
Step 53. Add a new filter rule
Click the IP Filter List tab, and then click
Add to add an IP Filter List.
Step 54. Edit IP filter list
Type a name for the filter list (e.g., MH-5001 to
WinXP), uncheck Use Add Wizard check box,
and click Add.
Step 55. Edit
the
address
of
filter
properties
In the Source address, choose A specific IP
Subnet, and enter the IP address and Subnet
of
the
local
subnet
(ex.
mask
192.168.40.0/255.255.255.0).
In
the
Destination address, choose A specific
IP Address, and enter the IP address of
WinXP (ex. 211.54.27.6). Uncheck Mirror
check box. Click OK to next.
151
Advertisement
Table of Contents
Troubleshooting
