Planet Networking & Communication MH-5001 User Manual page 117

MH-5001 User Manual
Step 3. Customize the rule
Similar to those in WALL-1, except that you
should interchange the Local IP Address with
Remote IP Address in the Condition part and
the Outgoing SPI with the Incoming SPI in the
Action part. Besides, set the Peer's IP
Address with the WAN1 IP address of WALL-1.
Step 4. Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
114
Chapter 13
Virtual Private Network – IPSec