Using The Setup Wizard - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual Chapter 1
Quick Start
Figure 1-6 The default settings of MH-5001
As the above diagram Figure 1- illustrated, this diagram shows the default topology of MH-5001. And you can configure the
MH-5001 by connecting to the LAN1_IP (192.168.1.254) from the PC1_1 (192.168.1.1). In the following sections, we will teach
you how to quickly setup the MH-5001 in the basic appliances.
1.5

Using the Setup Wizard

A computer on your LAN1 must be assigned an IP address and Subnet Mask from the same range as the IP address and Subnet
Mask assigned to the MH-5001 in order to be able to make an HTTPS connection using a web browser. The MH-5001 is assigned
an IP address of 192.168.1.254 with a Subnet Mask of 255.255.255.0 by default. The computer that will be used to configure the
MH-5001 must be assigned an IP address between 192.168.1.1 and 192.168.1.253 with a Subnet Mask of 255.255.255.0 to be able
to connect to the MH-5001. This address range can be changed later. There are instructions in the MH-5001 Quick Installation
Guide, if you do not know how to set the IP address and Subnet Mask for your computer.
14