Setup Anti-Dos - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual
Step 4. View the Firewall Log
You can go to DEVICE Status>Firewall Logs
>Firewall Logs to view the firewall logs. If you
prefer to download these logs, please click the
"Download To Local" button to save the logs to
localhost.
FIELD
No
Time
From
To
Protocol/Service
From
To
Action
Rule

10.4.2 Setup Anti-DoS

Step 5. Setup Anti-DoS
With the Anti-DoS attacks protection
enabled, the MH-5001 will be equipped with the
built-in Anti-DoS engine. Normal DoS attacks will
show up in the log when detecting and blocking
such traffic. However, Flooding attacks require
extra parameters to recognize. Check the
Enable DoS attacks protection checkbox.
And change the value of flooding thresholds as
your preference.
DEVICE Status > Firewall Logs > Firewall Logs
The indicated firewall log sequence number.
The record time of indicated firewall log.
The source IP address which the indicated log event come from.
The destination IP address which the indicated log event is bound for.
The record log is TCP, UDP or ICMP, and which service it will be.
The interface which the indicated log event come from.
The interface which the indicated log event is bound for.
The status of indicated firewall log is Block or Forward.
The log is produced by which firewall rule.
"Default" means the default rule of the selected firewall direction.
"RM XXX" means the log is produced by remote management function (Almost it is the illegal
user who wants to use the Non-Opened remote management functions.
Other condition, it will be marked at the rule number (ex. Rule0, Rule1...).
Table 10-3 Firewall log field description
ADVANCED SETTINGS > Firewall > Anti-DoS
DESCRIPTION
88
Chapter 10
Firewall