Planet Networking & Communication MH-5001 User Manual page 118

MH-5001 User Manual
Step 5. Add a Firewall rule
Same as that in IKE method. Please make sure
that the Firewall is enabled. Select WAN1-to-LAN1
to display the rules of this direction. The default
action of this direction is Block with Logs. We
have to allow the VPN traffic from the WAN1 side
to enter our LAN1 side. So we click the Insert
button to add a Firewall rule before the default
rule.
Step 6. Customize the Firewall rule
Check the Activate this rule. Enter the
Rule Name as AllowVPN, Source IP as
WAN1_VPNB (192.168.40.0), and Dest. IP
as LAN1_VPNB (192.168.88.0). Click Apply
to store this rule.
Step 7. View the result
Now we have inserted a new rule before the
default firewall rule.
192.168.40.0/24 to 192.168.88.0/24 will
be allowed to pass through the MH-5001 and
successfully access the 192.168.88.0/24
through the VPN tunnel.
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
ADVANCED SETTINGS > Firewall > Edit Rules
Any packets from
115
Chapter 13
Virtual Private Network – IPSec