Planet Networking & Communication MH-5001 User Manual page 107

MH-5001 User Manual
Step 4. Detail settings of IPSec IKE
In this page, we will set the detailed value of IKE
parameter. Fill in the related field as
indicated to finish these settings.
FIELD
Transport Layer
Condition
Protocol
Enable Replay
Action
Detection
Negotiation Mode
Pre-Shared Key
Encryption
Algorithm
SA Life Time
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add >
Advanced
Table 13-5
DESCRIPTION
Utilize this field to select some packets which are
specified protocol (ANY, TCP, UDP). If the
packets are not the specified protocol will not be
allowed to pass through IPSec tunnels.
Whether is the "Replay Detection" enabled?
View only, it is set previously and can not be
edited again.
View only, it is set previously and can not be
edited again.
Choose a type of encryption and authentication
algorithm combination.
Set the IKE SA lifetime. A value of 0 means IKE
SA negotiation never times out. See Chapter 12
for details.
ANY / TCP / UDP
NO / YES
Phase1
Can not be edited
Can not be edited
Encrypt and Authenticate
(DES, MD5) /
Encrypt and Authenticate
(DES, SHA1) /
Encrypt and Authenticate
(3DES, MD5) /
Encrypt and Authenticate
(3DES, SHA1)
0~86400000 sec
0~1440000 min
0~24000 hour
104
Virtual Private Network – IPSec
Range / Format EXAMPLE
1234567890
Encrypt and
Authenticate
(DES、MD5)
Chapter 13
TCP
NO
Main
28800 sec