Planet Networking & Communication MH-5001 User Manual page 78

MH-5001 User Manual
Activate this rule
Status
Rule name
Incoming packets
from
Source IP &
Netmask
Dest IP &
Netmask
Service
Configure src.
port? Type Src.
port
Condition
Type
Src. Port
Configure dest.
port? Type Dest.
port
Type
Dest. Port
Forward to
Action
Nexthop gateway
IP
FIELD
The policy routing rule is enabled or not.
The policy routing rule name.
Packets comes from which interface
Verify if the incoming packets belong to the
range of the Source IP/Netmask in the policy
routing rule.
Verify if the incoming packets belong to the
range of the Dest IP/Netmask in the policy
routing rule.
Verify what is the service of this packet?
If the service is TCP or UDP, we can choose to
configure or not to configure source port.
If we decide to configure source port, we must
choose the port to be single or range.
If we select single at above field, we just have to
fill a port in the first blank space. If we select
range at above field, we need to fill the range of
the ports.
If the service is TCP or UDP, we can choose to
configure or not to configure destination port.
If we decide to configure destination port, we
must choose the port to be single or range.
If we select single at above field, we just have to
fill a port in the first blank space. If we select
range at above field, we need to fill the range of
the ports.
If the packet is matched to this rule, which
interface does this packet sent out to?
The next gateway IP address of forwarding
interface.
Table 8-2 Add a policy routing entry
DESCRIPTION
75
Range / Format EXAMPLE
Enabled / Disabled
text string
GenlManaRoom
(Max: 200 entries)
LAN / DMZ
regions
IPv4 format / IPv4
192.168.40.192 /
255.255.255.192
format
IPv4 format / IPv4
0.0.0.0 / 0.0.0.0
format
ANY / TCP / UDP
/ ICMP
Enabled / Disabled
Single / Range
1 ~ 65534
Enabled / Disabled
Single / Range
1 ~ 65534
WAN interfaces
IPv4 format 210.2.1.6
Chapter 8
Routing
Enabled
LAN1
Any
No
N/A
N/A
No
N/A
N/A
WAN1